PEEK5600BL Particles

PEEK has excellent comprehensive performance due to the large number of benzene ring structures in its molecules. PEEK (polyetheretherketone) resin is a high-performance special thermoplastic material and one of the important varieties of commercial polyaryletherketone resins. At present, polyetheretherketone is widely used in petroleum, food processing, automobile, aerospace and other fields due to its excellent electrical properties, mechanical properties, high temperature resistance, corrosion resistance, etc. PEEK5600BL is modified by PEEK5600G + blue masterbatch. The mechanical properties, thermal properties, electrical properties and other properties of the particles are the same as those of the same brand PEEK particles before adding masterbatch to change the color.

Item	Test Standard or Instrument	Unit	PEEK5600BL
			Blue masterbatch modified PEEK
Tensile strength(23℃)	ISO527-2/1B/50	MPa	95
Tensile modulus(23℃	ISO527-2/1B/51	GPa	4.0
Tensile elongation(23℃)	ISO527-2/1B/50	%	25
Bending strength(23℃)	ISO 178	MPa	169
Bending modulus(23℃)	ISO 178	GPa	4.2
Compressive strength(23℃)	ISO 604	MPa	125
Charpy tched impact strength( no gap)	ISO 179/U	KJ/m2	150（No break）
Lzod impact strength	ISO 180/A	KJ/m2	6

1、If you need other parameter, please contact us!

2、This performance index cannot be used as acceptance criteria.

 

Item ​	Test Standard or Instrument	Unit ​	PEEK5600BL
			Blue masterbatch modified PEEK
Melting point	DSC	℃	343
Distortion temperature	ISO 75-1/-2	℃	155
Continuous using temperature	UL 74685	℃	260
Coefficient of thermal expansion	ASTM D696	ppm K-1	46
Flammable level	UL 94	/	V-0
Thermal conductivity	ISO 22007	W/（m·K）	0.28

1、If you need other parameter, please contact us!

2、This performance index cannot be used as acceptance criteria.

 

Item ​	Test Standard or Instrument	Unit ​	PEEK5600BL
			Blue masterbatch modified PEEK
Dielectric strength	IEC 60243-1	KV/mm	24
Dielectric constant	IEC 60250	–	3.2
Surface resistance Surface Resistance	IEC 61340	Oh	1013
Lossy medium	IEC 60251	–	0.004

1、If you need other parameter, please contact us!

2、This performance index cannot be used as acceptance criteria.

Item	Test Standard or Instrument	Unit	PEEK5600BL
			Blue masterbatch modified PEEK
Color	–		blue Blue
Density	ISO 1183	g/cm3	1.29±0.01
Water Abs. (25℃.24Hrs)	ISO 62	%	0.05
Mould shrinking percentage	3mm,170℃, Flow direction	%	1.0
	Perpendicular to flow direction	%	1.3
Simeom Denis Poisson	ISO 527-2		0.4
Rockwell hardness	GB/T 3398.2	HRR	118
Friction coefficient	ASTM D3702	m	0.30-0.50
Melt flow index	ISO1133	g/10min	10

1、If you need other parameter, please contact us!

2、This performance index cannot be used as acceptance criteria.

• FDA approved
• Low noise
• High strength
• Self-lubrication
• Impact resistance
• High purity
• Wear resistance
• High temperature resistance
• Lightweight
• Corrosion resistance
• Hydrolysis resistance
• Good biocompatibility