http://en.jhchinapeek.com/uploadfiles/211.149.195.244/webid1564/source/201911/157345031150.jpg
  • PEEK7600GF30

  • Relying on the previous ten years of experience accumulated in the PEEK industry, our company officially started the polymerization production of PEEK resin, which can provide stronger raw material support for PEEK parts and products and create unique advantages. At the same time, through the R & D and production of products and parts, it will also promote the R & D and production of raw resin polymerization. Our company has the entire industry chain enterprise with PEEK resin raw material polymerization, modified granulation, continuous extrusion of plate and bar and R & D and production of finished parts.
  • Tel: 0086-537-5135559
  • Fax: 0086-537-5135559
  • E-mail: chinaPEEK@chinaPEEK.com
  • Inquiry Now
    • PEEK7600GF30
  • Product Details
    • The cost and technical advantages are very prominent! As an advanced engineering plastic, PEEK, due to its good machinability, flame retardant, non-toxic, wear resistance, corrosion resistance and other characteristics, has played an important role in weight reduction, extension of component using life, optimization of component utilization. With the acceleration of downstream application promotion, it is expected that China's PEEK demand will exceed 10,000 tons in 2022.


  • Mechanical Behavior
    • 项目(Item)测试标准或仪器
      (Test Standard or Instrument)
      单位(Unit)PEEK7600GF30
      含30%玻纤
      (PEEK+30%Glass fiber)

      拉伸强度(23℃)

      Tensile strength(23℃)

      ISO527-2/1B/50MPa

      162

      拉伸模量(23℃)

      Tensile modulus(23℃

      ISO527-2/1B/51GPa11

      拉伸延伸率(23℃)

      Tensile elongation(23℃)

      ISO527-2/1B/50%3.3

      弯曲强度(23℃)

      Bending strength(23℃)

      ISO 178MPa247

      弯曲模量(23℃)

      Bending modulus(23℃)

      ISO 179GPa8.9

      压缩强度(23℃)

      Compressive strength(23℃)

      ISO 604MPa248

      Lzod冲击强度( 无缺口)

      Lzod impact strength( no gap)

      ISO 180/UKJ/m257



  • Thermal Performance
    • 项目(Item)

      测试标准或仪器

      (Test Standard or Instrument)

      单位(Unit)PEEK7600GF30
      含30%玻纤
      (PEEK+30%Glass fiber)

      熔点

      Melting point

      DSC343

      热变形温度

      Distortion temperature

      ISO 75-1/-2323

      连续使用温度

      Continuous using temperature

      UL 74685260

      热膨胀系数

      coefficient of thermal expansion

      ASTM D696ppm K -1
      17.5

      易燃性等级

      Flammable level

      UL 94/
      V-0

      导热系数

      Thermal conductivity

      ISO 22007W/(m·K)0.30



  • Electrical Performance
    • 项目(Item)

      测试标准或仪器

      (Test Standard or Instrument)

      单位(Unit)PEEK7600GF30
      含30%玻纤
      (PEEK+30%Glass fiber)

      介电强度

      Dielectric strength

      IEC 60243-1KV/mm

      17

      介电常数 

      Dielectric constant

      IEC 60250-
      3.8

      表面电阻 

      Surface resistance


      Ω1012Ω

      损耗介质

      Lossy medium

      IEC 60251-0.004



  • Other Properties
    • 项目(Item)

      测试标准或仪器

      (Test Standard or Instrument)

      单位(Unit)PEEK5600GF30
      含30%玻纤
      (PEEK+30%Glass fiber)

      颜色 

      Color

      -

      原色、灰黄色

      Natural

      实密度

       Density

      ISO 1138g/cm31.5

      吸水率 (25℃.24Hrs)

      Water Abs. (25℃.24Hrs)

      ISO 62%
      0.04

      成型收缩率(25-24℃)

      Mould shrinking percentage

      3mm厚度,170℃条件流动方向

      3mm,170℃, Flow direction

      %0.3

      垂直于流动方向

      (饱和结晶后大些)

      Perpendicular to flow direction

      %0.8

      泊松比

      Simeom Denis Poisson 

      ISO 527-2
      0.35

      洛氏硬度

      Rockwell hardness

      GB3398.2HRR123

      摩擦系数

      Friction coefficient

      ASTM D3702μ0.30

      熔融指数

      Melt flow index

      ISO1133-2005g/10min2



  • Main Performance
    • 1381582938832705.png

Immediately Consult

Name *
Phone
Email *
Message *
Code *
 

Other Products

Tag: PEEK
CopyRight © 2020-2024 Shandong Junhao High Performance Polymer Co., Ltd. All Rights Reserved.  Sitemap  Alltag  Designed by Zhonghuan Internet